• Replies 16 replies
  • Subscribers 576 subscribers
  • Views 1389 views
  • Users 0 members are here
Options
Related

Citect SCADA Demo Mode closes the client after 2 mins

Arian

Hi, 

I am trying to find out how to use the client when system services are in Demo Mode. As in the documentation is mentioned that the services keep working for 15 mins, the client fails after 2 mins with the message 'Software Protection Failure. No key found....'. Is this normal, or is something wrong in my setup? I've found an old tech note which mention that there is an incompatibility between Demo Mode and full screen mode of the client but it doesn't apply here.

Please advise.

BR,

Arian

Parents
  • Here it is:
    2019-03-07 18:06:19.841 +02:00 *** Citect process is starting up ***
    2019-03-07 18:06:19.863 +02:00 Running in 32 bit process architecture
    2019-03-07 18:06:19.894 +02:00 Running in Console Mode
    2019-03-07 18:06:19.993 +02:00 Data Execution Prevention (DEP), has been enabled successfully
    2019-03-07 18:06:23.203 +02:00 Loaded _Library RDB; time 2019-03-07 17:55:26.
    2019-03-07 18:06:23.840 +02:00 Alarm: Client loaded _Categor RDB; time 2019-03-07 17:55:27.
    2019-03-07 18:06:24.653 +02:00 MultiMonitor: No screen profile configured, 1 monitors configured, 1 monitors found
    2019-03-07 18:06:24.693 +02:00 Licensing::LicenseProtection:ProtInit, licRunMode: 0x23eb
    2019-03-07 18:06:24.920 +02:00 KerMain: Task ran for more than 1 sec: Task=MAIN, time=4702ms
    2019-03-07 18:06:24.920 +02:00 Citect (32 bit) ServiceDisplayClient (PID 9936) Startup 8.10
    2019-03-07 18:06:27.644 +02:00 MultiMonitor: Showing startup page 'Startup' on primary monitor '1'
    2019-03-07 18:08:04.969 +02:00 Licensing::LicenseProtection:licWait, system stops to run after trying to get remote license, retry count: 5
    2019-03-07 18:08:04.969 +02:00 ## SHUTDOWN ## - Software Protection Failure. No key found or no license available from network. (at File (..\ioserver\LicenseProtection.cpp)
Reply
  • Here it is:
    2019-03-07 18:06:19.841 +02:00 *** Citect process is starting up ***
    2019-03-07 18:06:19.863 +02:00 Running in 32 bit process architecture
    2019-03-07 18:06:19.894 +02:00 Running in Console Mode
    2019-03-07 18:06:19.993 +02:00 Data Execution Prevention (DEP), has been enabled successfully
    2019-03-07 18:06:23.203 +02:00 Loaded _Library RDB; time 2019-03-07 17:55:26.
    2019-03-07 18:06:23.840 +02:00 Alarm: Client loaded _Categor RDB; time 2019-03-07 17:55:27.
    2019-03-07 18:06:24.653 +02:00 MultiMonitor: No screen profile configured, 1 monitors configured, 1 monitors found
    2019-03-07 18:06:24.693 +02:00 Licensing::LicenseProtection:ProtInit, licRunMode: 0x23eb
    2019-03-07 18:06:24.920 +02:00 KerMain: Task ran for more than 1 sec: Task=MAIN, time=4702ms
    2019-03-07 18:06:24.920 +02:00 Citect (32 bit) ServiceDisplayClient (PID 9936) Startup 8.10
    2019-03-07 18:06:27.644 +02:00 MultiMonitor: Showing startup page 'Startup' on primary monitor '1'
    2019-03-07 18:08:04.969 +02:00 Licensing::LicenseProtection:licWait, system stops to run after trying to get remote license, retry count: 5
    2019-03-07 18:08:04.969 +02:00 ## SHUTDOWN ## - Software Protection Failure. No key found or no license available from network. (at File (..\ioserver\LicenseProtection.cpp)
Children
No Data