ABCLX driver to Allen Bradley Compact Logix 5069 series with firmware v36 or v37

Hi Leon Kenison 

What version of the ABCLX driver are you using?

Please see TechNote for one possible solution if using a older driver:

TN 000033964 or https://softwaresupportsp.aveva.com/en-US/knowledge/details/000033964?lang=en_US

Kind regards

Olivier

Hi Olivier, 

I encountered a problem connecting to the Rockwell new simulator of AB PLC (Factory Talk Logix Echo V2.0). this new simulator support all ControlLogix 5580 V33/v34/v35, for PLC Programming same like the real Logix PLC programming,  but I configured it as same as ABCLX Driver in Citect SCADA, and never connected it successfully. it will be successful if I connect with Real Physical CPU PLC 1756-L85E V33 with same configuration in IO Device, Board, port etc....

I consulted many local agents, but they were unable to resolve it.

Has anyone experienced a similar issues or do you have any suggestions or a solution?

my version:

 ABCLX driver version is V3.02

Citect SCADA 2018 R2

my e-mail is: wenyw1203@hotmail.com

I'm looking forward to your suggestions.

Thanks a lot.

Wei

Hi Olivier, 

I encountered a problem connecting to the Rockwell new simulator of AB PLC (Factory Talk Logix Echo V2.0). this new simulator support all ControlLogix 5580 V33/v34/v35, for PLC Programming same like the real Logix PLC programming,  but I configured it as same as ABCLX Driver in Citect SCADA, and never connected it successfully. it will be successful if I connect with Real Physical CPU PLC 1756-L85E V33 with same configuration in IO Device, Board, port etc....

I consulted many local agents, but they were unable to resolve it.

Has anyone experienced a similar issues or do you have any suggestions or a solution?

my version:

 ABCLX driver version is V3.02

Citect SCADA 2018 R2

my e-mail is: wenyw1203@hotmail.com

I'm looking forward to your suggestions.

Thanks a lot.

Wei

Try updating your ABCLX driver as V3.02 is very old, there was a change with rockwell PLC's with onboard RJ45 ethernet ports and i had an issue with SCADA2018 some time back, i installed the latest driver at the time and it solved my issue.

Thanks, Alan.

For Updating ABCLX Driver: is that be ok just unzip the  ABCLX_5.6.0.2_RELEASE.zip, and run xx.msi files, then finished installation, did you do like this ?